Large Format Living Room Floor Tile in Brighton
This Brighton subdivision home had builder-grade carpet in the main living area that the homeowners wanted to replace with tile. The concrete slab was in good condition with no cracks or significant moisture, which made it a straightforward installation. We used a 24x24 beige stone-look porcelain in a straight stack pattern with a 1/8-inch grout joint, which gives the floor a clean, continuous appearance.
For a large open-plan area like this, the starting layout point is critical. We snapped reference lines from the most visible entry point into the room, then adjusted slightly so cuts at the sliding door threshold and the kitchen transition were balanced on both sides. The tile runs under the console table and sofa position, which means it will look right regardless of how the furniture is arranged later.
Project Details
| Service | Residential Tile Installation |
|---|---|
| Area | Brighton |
| Materials | 24x24 beige stone-look porcelain, direct-bond thinset on concrete slab |
| Pattern | Straight stack, 1/8-inch joint |
| Scope | Residential living room floor replacement |
What We Did
Removed carpet and pad, cleaned and profiled slab surface for thinset adhesion
Snapped layout lines from entry point, adjusted for balanced cuts at all transitions
Set 24x24 porcelain with large-notch trowel and back-butter on each tile
Grouted with matching beige unsanded grout, sealed on completion
Large format tile on a concrete slab is one of the cleaner installations when the substrate is in good condition. The slab does the structural work; the tile just needs to be set flat.
